Glow-x9 Cold Mask

Toll-Free 🇺🇸 USA, 🇨🇦 Canada: 1 888-580-0508

Toll-Free 🇬🇧 United Kingdom: 44 117-200-1500

Dives Med

From $13.50

GLOW-X₉ COLD MASK

A cooling post-treatment mask made of a hydrolysed collagen matrix with a strong redermalizing effect and excellent rejuvenating properties.

IN COMBINATION WITH MICRONEEDLE MESOTHERAPY:

The effect of GLOW-X9 peeling can be enhanced using acid in combination with microneedles. For this purpose, the GLOW-X9 treatment protocol can be performed before starting microneedle mesotherapy (SOFT version) or immediately after performing skin microperforation (DEEP version):

SOFT VERSION:

Before starting the treatment, the skin should be disinfected with an antiseptic and then degreased with DIVES Med. - GLOW-X9 PRE-TREATMENT SPRAY. Apply acid on the prepared skin with quick, thin movements with a brush. Pay particular attention to the even distribution of the preparation on the skin. The application of acid may cause discomfort and a burning sensation to the skin. Leave the GLOW-X9 layer for 3-5 minutes, and then perform a further microneedle mesotherapy procedure, according to the depths recommended in the table. After the microperforation of the skin is completed, wash the product with water until the burning sensation subsides. At the end of the procedure, it is recommended to use the DIVES Med mask. - GLOW-X9 - COLD MASK for 15-20 minutes and DIVES MED - GLOBAL REGENERATION, which will reduce the feeling of possible irritation and discomfort.

DEEP VERSION:

Before starting the treatment, the skin should be disinfected with an antiseptic and then degreased with GLOW-X9 PRE-TREATMENT SPRAY. Perform microneedle mesotherapy according to the recommended puncture depths (table). Apply acid to the perforated skin with quick movements, a thin layer using disposable cosmetic baguettes. Pay particular attention to the even distribution of the preparation on the skin. The application of acid may cause discomfort and a burning sensation to the skin. Leave the GLOW-X9 layer for 3-5 minutes, and then rinse it with water until the burning sensation subsides. At the end of the procedure, it is recommended to use the DIVES MED mask. - GLOW-X9 - COLD MASK for 15-20 minutes and DIVES MED - GLOBAL REGENERATION, which will
reduce the feeling of possible irritation and discomfort.

AS A BIOREVITALIZING PEELING:

The GLOW-X9 treatment can be used alone, without being combined with other aesthetic medicine treatments, bringing positive effects in bioredermalization (rebuilding) and revitalization of the skin. The peeling intensity depends on the number of applied layers of the product (table) Before using the acid, cleanse the skin and degrease it with GLOW-X9 PRE-TREATMENT SPRAY. Apply the acid to the prepared skin with quick, thin movements with a brush. Pay particular attention to the even distribution of the preparation on the skin. Allow to dry for 5-8 minutes. The application of acid may cause discomfort and a burning sensation to the skin. Frost may appear due to protein denaturation. Its occurrence allows the depth of acid penetration to be assessed. After gentle absorption, you can apply another layer, possibly avoiding areas subject to excessive irritation. Use 1-4 layers depending on the type and sensitivity of the skin, as well as indications and the desired depth of penetration. After applying the acid, wait until the acid is completely absorbed, and then wash off all layers with water until the burning disappears. It is recommended to use the DIVES Med mask at the end of the procedure. - GLOW-X9 - COLD MASK for 15-20 minutes and the DIVES MED regeneration cream. - GLOBAL REGENERATION, which will reduce the feeling of possible irritation and discomfort.

SIDE EFFECTS:

The application of GLOW-X9 may cause redness, irritation, and a feeling of skin tenderness. In case of unexpected reaction or excessive skin irritation with possible protein coagulation, DIVES MED should be applied immediately. -NEUTRALIZING GEL and leave it for 4-5 minutes, then rinse with plenty of cold water. Depending on the procedure used and the individual characteristics of the patient's skin, peeling may lead to irritation, coagulation and peeling of the skin.

POST-TREATMENT RECOMMENDATIONS:

To obtain optimal treatment results and safe convalescence:
- do not apply makeup until 12 hours after the treatment
- immediately after the treatment, avoid exposure to natural or artificial ultraviolet radiation and use of the sauna and swimming pools
- use rich regenerating creams and high UV filters, e.g. DIVES Med. - GLOBAL PROTECTION SPF 50
- in the event of a keratolytic effect, do not remove or tear off the flakes of the peeling skin
- do not use other peeling agents and substances with irritating properties until the skin is completely recuperated

PRECAUTIONS:

- Read the package leaflet before use.
- The preparation is intended only for professional use by doctors and specialists in medicine and aesthetic cosmetics.
- Before performing the procedure, it is absolutely necessary to conduct a medical interview, rule out contraindications and obtain informed consent for the procedure.
- The product is highly irritating to the skin and mucous membranes. May cause chemical eye damage. Avoid contact with eyes. In the event of contact with the eyes, immediately rinse them with cold water until the burning sensation subsides and immediately see an ophthalmologist.
- Before starting the application procedure, it is necessary to protect your eyes. Patients with contact lenses should be advised to remove them.
- Do not use on birthmarks, tattoos, and permanent makeup.
- Use only on Fitzpatrick skin types I-IV.
- Product for external use. Do not inject or eat.
- Keep out of the reach of children.
- Do not use the product after the expiry date and if the ampoule is damaged or has been incorrectly stored. - Incorrect or inconsistent with the manufacturer's recommendations may lead to complications and side effects.

SHELF LIFE AND STORAGE:

Do not use the product after the expiry date and if the packaging is damaged or has been improperly stored. Store the product in its original packaging at a temperature of 15-25 ° C, protect it from freezing and direct sunlight. Use the contents of the package for a single application and do not re-sterilize.